User Tag List

Affichage des résultats 1 à 15 sur 15
  1. #1
    Fournisseur Avatar de CTD
    Date d'inscription
    juillet 2015
    Localisation
    Rouen
    Âge
    9
    Messages
    24
    02 35 07 45 90

    Exocad version 5675 - 16 juillet 2015

    • Who can use this software version?

      Anyone who is entitled to software updates: That is, if the dongle was purchased less than a year ago, or if an update contract has been purchased that covers the current period. Remember that you can get an individual quote for an update contract by entering the serial number of the dongle in exoportal; the system will calculate the price considering the modules activated and the time since the last update period. We still have a cap for the surcharge for a gap in update contracts - so even for dongles purchased four years ago and never got an update contract so far, you can get an update to the latest version at a very reasonable price!
      Which OS platforms are supported?

      Even though the new software features a "Windows 8 style" look, it will still run on Windows 7. Windows 8 and 8.1 are also supported. The 32-bit version supports both 32-bit and 64-bit OS, though 64-bit is recommended.

    Scanner Integration

    • New
      Digital impression scan beta option available for scanning more than one bite impression

    • Improvement
      Updated SDK version to support many new scanner models of 2015. Note: Only the 64-Bit version is recommended for using exoscan due to memory requirements.

    • Improvement
      Changed multi-die import matching to preserve surfaces of previously registered dies when adding a new die to allow working with preparations/dies which are very close together or even intersect visually due to scanner inaccuracies

    • Improvement
      Best fit registration is now executed automatically when working with “-preregistered” files

    • Improvement
      Added configuration option to allow vestibular scan registration with flipped normals for impression scanning (JawRegistrationSurfaceNormalsMayBeInverted)

    • Improvement
      Digital impression antagonist scan type is now supported with exoscan desktop scanners that offer impression scanning including the case of two healthy jaws

    • Improvement
      exoscan would show Antagonist for both jaws when working with healthy teeth in impression scan mode

    DentalDB

    • New
      Scanimport04 for Planmeca's IOS PlanScan added

    • Improvement
      General scan-import behavior improvements

    • Improvement
      Add-option to enable project dependent indicator buttons

    • Improvement
      In some skins when opening combobox with elements grouped then some elements may not be displayed (e.g. in Color-Dropdown)

    • Improvement
      Fix for duplicate tray number after user deleted a project from the database

    DentalDB/dentalshare

    • Improvement
      Use cloud-based material configuration only if dentalshare recipient user/group has explicitly specified (uploaded) a material configuration

    DentalDB/Work Params

    • Change
      Updated 3M Lava™ material configuration

    DentalCAD

    • New
      Bridge split feature is now available for advanced designs or optimized production

    • New
      New Freeform beta feature to add attachments/bolts that go ‘through’ the crown (needs to be enabled in settings.xml by AttachmentInFreeformShowOptionAllowTouchAnything, and user must activate it manually). Useful for adjustable construction elements for telescopical crowns (e.g. Si-tec TK-Soft).

    • New
      Added option InlayBlockoutPreplineIfParamIsZero to (default)-settings.xml allow blocking out of preparation margins due to undercuts (default=off like in previous versions)

    • Improvement
      Freeform applied attachment/bolt surfaces now avoid getting fuzzy after closing freeform dialog

    • Improvement
      Interoperability of scene files between 32/64-bit DentalCADApp improved e.g. when working with 2D-Images

    • Improvement
      Tool for creating the tooth library setup can now also edit approximal contact points (Shift+Click to reposition approx. contacts)

    • Improvement
      Face scan and textured scan rendering improved, and support .obj files where the texture file name is referenced in a separate .mtl file

    • Improvement
      Improved error reporting behavior in case of crashes (regression fix since transition to Microsoft .NET 4.0)

    • Improvement
      Software online activation dialogue is now only displayed once

    • Improvement
      Attachment scaling is now configurable with flag in Attachment library config.xml (default is NOT scalable due to many requests by attachment library providers)

    • Improvement
      Fixed Inlay tooth model adaptation crash in some cases when new option InlayAdapationIntelligentCutting was not disabled

    • Improvement
      Waxups can now be adapted to gingiva when they were designed on manually placed implants (without implant library)

    • Improvement
      Waxup automatic axis estimation might lead to exception messages or wrong coloring in Distance to antagonist tools

    • Improvement
      Freeform merged in rare circumstances when user changes design and closes dialogue very fast afterwards, it might lead to wrong .constructionInfo files due to cache issues

    • Improvement
      Pontic occlusal axes might be upside down after using Load custom tooth model in some scan data configurations (and then it’s bottom cannot be adapted to gingiva)

    • Improvement
      Image2D bugfixes in spline drawing and to delete loaded images

    Articulator

    • New
      New articulator “bioArt A7 Plus” added

    • Improvement
      Improved automatic removal of intersections between both jaws in scan data editor step when working without registered jaw coordinate systems, or where scan data is very inclined

    • Improvement
      Crash bugfix when restarting articulator where protrusion was not calculated in previous simulation

    Model Creator

    • Improvement
      General robustness improved especially with lab analogues

    • Improvement
      Improve visual rendering of base plate geometries

    • Improvement
      .modelInfo can export “Drill holes” when configured in plates

    • Improvement
      Bugfix in .modelInfo file export in some configurations

    • Improvement
      1-click tooth model segmentation crash bugfix in rare cases

    Provisional Module

    • Improvement
      Preserve scan data vertex-coloring in provisional module

    • Improvement
      1-click tooth model segmentation crash bugfix in rare cases

    Nesting

    • Improvement
      STL-Import wizard optimized

    • Improvement
      Premill-Abutment support also possible when importing raw stl files

    • Improvement
      Loading .constructionInfo robustness improved when loading files from other software versions

    • Improvement
      Support for multilayer blanks with configurable layer colors and sizes

    3D PDF

    • Improvement
      Optimized output data was not compatible with current Adobe Reader versions when scan data had topology errors

    exoViewer

    • Improvement
      Function to visualize open edges in meshes now also visualized topology problem points

    Tooth Library ZRS

    • Change
      Improved and extended tooth library add-on "ZRS" now available

      • 61 sets of upper arch anterior teeth
      • 19 sets of lower jaw anterior teeth
      • 19 sets of upper arch posteriors
      • 19 sets of lower jaw posteriors


  2. #2
    Senior Member Avatar de Bastien
    Date d'inscription
    juin 2015
    Localisation
    Nord 59
    Âge
    35
    Messages
    1 019
    Billets dans le blog
    3
    J'installe ca en rentrant de vacances ! Merci la CTD :-)

    Pas de restrictions de carte graphique ce coup ci ?! :-D

  3. #3
    Fournisseur Avatar de CTD
    Date d'inscription
    juillet 2015
    Localisation
    Rouen
    Âge
    9
    Messages
    24
    02 35 07 45 90
    Non la carte graphique est surtout pour le partial mais pas pour l'exocad de base.

  4. #4
    Senior Member Avatar de Bastien
    Date d'inscription
    juin 2015
    Localisation
    Nord 59
    Âge
    35
    Messages
    1 019
    Billets dans le blog
    3
    Quelqu'un l'a installé sur un Solutionix SE ?

    Apparemment il y aurait un soucis avec un xml a modifier ?!

  5. #5
    non pas de soucis c'est juste que l'exocad que tu as est compilé pour fonctionner avec l'identica blue

    faut juste changer un truc ... mais la flemme de cherche, j'attends gentillement lundi pour casser les pieds à Guigui

  6. #6
    Senior Member Avatar de felix.p
    Date d'inscription
    juillet 2015
    Messages
    532
    Billets dans le blog
    1
    moi aussi sur un de mes pc la nlle version n'ouvre pas le cad lundi JM il va être débordé

  7. #7
    faut changer le chemin d'acces du scan dans le defaultsetting-db du config dentaldb

  8. #8
    Merci Hombre ! je viens de le faire

    pff le con y me dit que suis pas à jour .....
    Dernière modification par Julien ; 26/08/2015 à 09h13.

  9. #9
    fais gaffe a ta version de dongle.

    par contre j'ai reussi a demarrer le nouveau cad avec l'ancienne version de scan.

    ca permet d'avoir les nouveautés de conception avec ancien dongle

  10. #10
    Na sbon ! c'est une erreur de mon fournisseur , il a pas fait le job

  11. #11
    Senior Member Avatar de Jean-Michel BERTIN
    Date d'inscription
    juin 2015
    Localisation
    France Rouen
    Âge
    37
    Messages
    295
    Citation Envoyé par Julien Voir le message
    Na sbon ! c'est une erreur de mon fournisseur , il a pas fait le job
    ;-)

    Pour changer la direction du scan il suffit d'aller dans le fichier xml defaultsettings-db :

    C:\exocad-DentalCAD-64bit-2015-07-16\DentalDB\config

    Tu vas à la ligne 141 et tu changes la direction du fichier exe pour lancer ton scanner :
    Code:
    <ExecPath value="C:\Program Files\Medit\IdenticaBlue\Bin\IdenticaBlue.exe">

  12. #12
    Merci JM ! mais Crici t'as devancé

  13. #13
    Please, can anybody explain this new exocad feature?

    New
    Added option InlayBlockoutPreplineIfParamIsZero to (default)-settings.xml allow blocking out of preparation margins due to undercuts (default=off like in previous versions)


    I have problems blocking inlay/veneers undercut margins, maybe this will solve this issue.

    Merci beaucoup

    PS. I'm new to this forum, Hello to all.


  14. #14
    Senior Member Avatar de Bastien
    Date d'inscription
    juin 2015
    Localisation
    Nord 59
    Âge
    35
    Messages
    1 019
    Billets dans le blog
    3
    Citation Envoyé par biodentg Voir le message
    Please, can anybody explain this new exocad feature?

    New
    Added option InlayBlockoutPreplineIfParamIsZero to (default)-settings.xml allow blocking out of preparation margins due to undercuts (default=off like in previous versions)


    I have problems blocking inlay/veneers undercut margins, maybe this will solve this issue.

    Merci beaucoup

    PS. I'm new to this forum, Hello to all.

    You're from Ecuador ? Welcome here !

    You're not in the good section ! Post your problem here : http://lecoinduprothesiste.fr/forums...newthread&f=17 (using EXOCAD as prefix )

    Explain clearly what's wrong

    We'll try help you

  15. #15
    Senior Member Avatar de Jean-Michel BERTIN
    Date d'inscription
    juin 2015
    Localisation
    France Rouen
    Âge
    37
    Messages
    295
    Citation Envoyé par biodentg Voir le message
    Please, can anybody explain this new exocad feature?

    New
    Added option InlayBlockoutPreplineIfParamIsZero to (default)-settings.xml allow blocking out of preparation margins due to undercuts (default=off like in previous versions)


    I have problems blocking inlay/veneers undercut margins, maybe this will solve this issue.

    Merci beaucoup

    PS. I'm new to this forum, Hello to all.

    Hi biodentg,
    in the past, the margins of inlays and veneers in undercut areas was not blocked out, even when the user set the "untouchable zone" to 0.
    This behavior was different to crowns, where the margins was blocked out.
    When you enable this option in (default-)settings.xml, then the inlay margins are also blocked out in that case.

Règles de messages

  • Vous ne pouvez pas créer de nouvelles discussions
  • Vous ne pouvez pas envoyer des réponses
  • Vous ne pouvez pas envoyer des pièces jointes
  • Vous ne pouvez pas modifier vos messages
  •